DESIGN OF HYDRAULICS

 
IMTMA TRAINING INITIATIVE DESIGN SERIES
DI Logo  

Training on Hydraulic System Design for Machineries

Duration       : 6 Days

INTRODUCTION

The course is structured with introduction to basics of Hydraulics system to complete design. Design of Hydraulics is key to effective utilization of any Mechanical Application. Hydraulics design if not implemented correctly results in poor performance & quality problems during running. Conceptualization w.r.t the actual requirement in terms of force, speed and safety is very essential during design. Selection of hydraulic elements, sizing of elements, calculations for optimization, design of entire system is very vital in any mechanical industry. Assembly of hydraulic elements, hydraulic plumbing, machine interface and trouble shooting is key requirement. The entire course is designed to address all the above and convert engineer as hydraulic engineer. During the course a complete hydraulic system design will be carried out from concept to final design with hands on.

FOCUS AREAS
  • Basics of Hydraulics.
  • Introduction of Hydraulics elements
  • Introduction to Fluids, Pumps, Direction, Flow, Pressure Control Valves and Symbols
  • Introduction Hydraulic Actuators, Reservoirs, Hoses, Pipings, Fittings, Modular Valves, Manifolds, Electrical Devices, Proportional Valve and Servo
  • Study of customer requirement for Hydraulic power pack
  • Design exercise for Hydraulic power pack
  • Hands on training using one of the popular cad tool
  • Design Input-> Design Calculations-> Selection Of Hydraulic Elements-> Circuit Diagram-> BOM-> Detail Design in 2D Or 3D On CAD
  • Implementation of project on training kit
  • Assembly, Maintenance and Trouble Shooting

image2

Key Take Aways

After undergoing the programme, the participants will be able to -

    1. Comprehensive design knowledge on Hydraulic system
    2. Knowledge on design of simple to complex power pack
    3. Hands on assembly, testing, trouble shooting
    4. Knowledge in systematic approach on Hydraulic design
 
Benefits
  • Thorough knowledge on Hydraulic design fundamentals
  • Specialization in Hydraulic design
  • Develops full confidence on Hydraulic design
  • Techno commercial considerable growth of an industry
Participant Profile

This programme will benefit practicing Engineers and managers from industry of all segment. Diploma and graduate engineers with > 2 year experience.

Faculty
This programme will be conducted by Industry experts from various Industries;

Mr. N Swaminathan, Director of M/s Leonardo Automation (India) Pvt. Ltd.. Mr. Swaminathan is an industry expert with over 25 years of rich experience in the field of Oil Hydraulic/Lubrication/Fluid Handling technology.

Mr. Mohan Kumar, Senior Manager – Design, BFW; an industrial expert with more than 25 of experience in the field of Special Machine application.

Mr. Rakesh Kumar, HEAD - Marketing and Business Development, YUKEN INDIA LIMITED.

Mr. H V Rajashekara, Director - Design institute, IMTMA, and has >27 year experience on Machine Tool design.

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited to only 20 and will be accepted on ‘First Come First Serve’ basis. An evaluation at regular interval and Certificate of participation will be issued to participants upon successful participation of the course.

Important Information :
Participation fee includes, course material, working lunch and tea / coffee & Industrial visits. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

FEE : The stipulated fee can be paid online by clicking on 'Register and Pay online" button and using the secured HDFC payment gateway. Upon successful registration and payment, a separate registration and payment confirmation will be sent to the nominating authority mail id confirming the registration and OR payment details.

Cheque/DD : Alternatively, a Demand Draft / RTGS / NEFT / Cash payment / at par cheque in favour of ‘Indian Machine Tool manufacturers’ Association’ payable at Bangalore can be sent to the programme coordinator at the address mentioned in the programme brochure. In case of any difficulty in registering or site downtimes, please contact Akshaya at 8880111222.

IMTMA DESIGN INSTITUTE:
The rapid growth and emergence of new shining stars on the Indian Machine Tool panorama has created the need for a new breed of machine designers. Designers whose machines stand abreast with pride along with the designs of established international machine tool manufacturers.

Designers, with a systematic approach; who are equipped with a 360 degree view - from the fundamentals to the finished machine design. In view of this, IMTMA has again taken a positive initiative in providing state of the art facilities and industrial expertise to establish a high-end Design Institute for the cause of moulding fresh engineers into systematic machine tool designers. The IMTMA Design Institute aims to extend the training programmes to the machine tool and other companies for the benefit of training their fresh hires and nominated individuals into productive and highly efficient machine tool designers.”

VISION:

  • To establish a world class Design Institute which breeds “Machine Tool Designers”, with sound design knowledge & capable to take up the design task with confidence.
  • To Create “MACHINE TOOL DESIGNER TALENTED POOL” that can be tapped by the Industries for plug & play from first day.
3
Copyright @2013, IMTMA. All rights reserved.
Disclaimer : The purpose of this mail is to serve as information only. Please ignore this mail if you are not the intended recipient. We value your relationship and would like to keep you in loop. To ensure our emails continue to reach your inbox, please add our email address to your address book. Should you wish to unsubscribe please use the link below.
1

image1

For Registration contact :

Rahul Vylen
Executive Officer - Design Institute, IMTMA
tel : 080 6624 6835
email : rahul@imtma.in

Participation Fee
(Non Residential) 
Rs. 18,000/- 
+ 15% service tax per participant.
(For IMTMA Members & SSI
Companies)

Rs. 20,000/- 
+ 15% service tax per participant.
(For Large & Medium Companies)

Rs. 18,000/- 
+ 15% service tax per participant.
(For Individuals)

USD 800/-
+ 15% service tax per participant.
(For Foreign Nationals)

Enquire 

Contact Address

INDIAN MACHINE TOOL 
MANUFACTURERS'  ASSOCIATION

@ Bangalore International Exhibition
Centre (BIEC) 10th Mile, Tumkur Road,
Madavara Post, Bangalore - 562 123
Tel : 080-66246600
Fax : 080-6624-6658
www.imtmatraining.in

Our Initiatives

Productivity Institute

The need for Productivity Institute

  • Is your work place suffering from poor productivity?
  • Do you feel that supervision is weak on the shop floor?
  • Do your shop floor personnel find it difficult to achieve targets?
  • You have the machine in place, but not the men to optimize usage?

  • Read More
Finishing School

Realizing the need to enhance the skill sets of fresh engineers in mechanical engineering to make "Industry Employable" and to mould them as per the company requirements, IMTMA organizes


Read More
Design Institute

The rapid growth of Indian machine tool Industry and the increasing sophistication of machine tool has created the need for a new breed of machine tool technologists.


Read More


request request