IMTMA Training Centre

Fundamentals of Painting and Coating Technologies

Date : 25 to 26 April, 2019

@ Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Introduction

The purpose of painting / coating a given surface is two-fold. First it protects from corrosion and second it serves as
decor, adding visual appeal of the product. Any painting / coating process involves substrate surface preparation,
application of the coating and drying of the coating. Thorough knowledge about the components of paint and powder
formulations, their application methods including drying and curing is essential to achieve the optimum productivity and
quality levels. Lack of knowledge in painting / powder coating leads to high rework and rejection rates.

Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organising a 2 day programme on
Fundamentals of Painting and Coating Technologies on 25 - 26 April 2019 at Gurgaon.

Focus Areas



• What is Paint - types, classification,
properties o Thinners
o Properties and contribution of raw materials in Paints
o One K and 2K Paints
• Primers, Surfacers and fillers
o Metallic Base Coats
o Clear Coats
o Inspecting wet Paint, Mixing, Handling of paints
• Importance of Paint Application
o Application methods
• Pre treatment before Coating
• Technology Of Spray Painting
o Air Spray, HVLP, Air Less, Air Assisted, Electrostatic
• Paint Spray Techniques - Films with discussion
• Powder Coating Technology
• Powder Coating Applications
• Quality of Finish
o Visual Paint defects, Identification, Root Cause Analysis and Remedies

Key Take Aways



After undergoing the programme, the participants will be able to -
1. Understand the fundamentals of painting and coating methods
2. Understand correct process sequence and the SOPs involved
3. Learn how to ascertain quality of painted products
4. Reduce rejection rates and rework in paint shops

Participation Fee



Rs. 7500/-

IMTMA Members / Micro Companies

Rs. 8500/-

IMTMA Non Members / Others

+18% GST

Group Concession : 5% for 3 to 5 and 10% for 6 and more delegates being nominated from the same company

Special concession available for Faculty & Students from engineering colleges

(subject to availability of seats)



Participant Profile

This programme will benefit paint-shop engineers and technical personnel involved in the functions of Process Planning,
Product Application engineering, Manufacturing, Quality Assurance, etc., and other related areas from Automobile & auto
ancillaries, Defence and Railway establishments, General Engineering and other Capital goods manufacturing industries.
All users of powder and paint coatings as well as suppliers of painting equipment and materials can derive benefits out of
this programme.
The programme will be highly interactive where participants can raise questions and solicit feedback from the expert faculty.


Faculty

This programme will be conducted by Mr. Meghan Manjrekar, Industry expert in Surface Coating &
Application Technology. Mr. Manjrekar is a Qualified Paint Technologist & has over 30 years of
experience in the domain. He is a certified International Coating Inspector – SSPC (USA) PCI Level
2. As a Consultant, he has an impressive list of Customers with OEMs & MNCs on his list. He has
been in the Training domain in the subject for over 10 years & has delivered special courses as well
as, in-house courses for industry in India & Abroad.


Participants Feedback

Exceptionally experienced faculty. Shares
a lot of practical issues. Overall a good
session - Mr. K P Choudhary, Sr.
Manager - Paint Shop, Uflex Ltd.


Industries Participated

The previous programmes have been well
r eceived by delegates from Ace, Uflex,
TAL, Carborundum Universal, LMW,
Faiveley, Brembo Brake, SFO, Titan,
ZF Wind power, Uflex etc.


For Registration Contact

Mr Shashank Kumar Singh

Executive

Telephone :   0124-4014101-4
Mobile :   +91 7571081726
Email :   gurgaontraining-sks@imtma.in

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.

Important Information : Participation fee includes, course material, working lunch and tea / coffee. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

Suggested Programmes


Advanced Heat Treatment Processes in Metalworking

25 to 26 April, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Induction Hardening and other surface Heat Treatment processes

23 to 24 May, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Metallurgy for Non-Metallurgists

11 to 12 June, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Additive Manufacturing / 3D Printing Technologies

11 to 12 June, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Towards Zero Defects in Welding Applications

11 to 12 June, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Get in touch

Copyright © 2018 IMTMA. All Rights Reserved.