IMTMA Training Centre

Understanding and implementing of risk assessment through FMEA

Date : 25 to 26 July, 2019

@ BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Introduction

In today's competitive market environment, the industry has realized the fact that servicing unreliable products is a very costly proposition. To a large extent, reliability is built into the product during the design and development phase. Failure Mode & Effects Analysis (FMEA) is an essential ingredient of reliability engineering and is a very powerful and effective technique used for improvement in design, assembly, materials engineering, servicing etc., in a diverse range of manufacturing activities. FMEA can be effectively applied in case of new developments, new technologies and components/assemblies or products which have inherent problems showing up in practice.

'Failure Mode & Effects Analysis' (FMEA) is an “ error prevention” oriented and proactive methodology that tries to pre-empt the occurrence of errors; reduce their significance (even if they were bound to occur) and in unavoidable circumstances, to increase the chance of error detection, so that the process could then be suitably controlled. FMEA is an aid for continuous improvement which fits into a PDCA (Plan-Do-Check-Act) pattern of activity. Whenever changes in product or processes or vendor / supplier are envisaged or effected, FMEA is redone to evaluate their effects.

Keeping this is view, Indian Machine Tool Manufacturers' Association (IMTMA) is organizing a 2 day programme on Understanding and Implementation of Risk Assessment through FMEA on 25 - 26 July 2019 at Bangalore.

Focus Areas



  • Introduction to FMEA Concepts
  • Reliability
  • Failure analysis vs FMEA
  • Cause & Effects Analysis
  • FMEA Methodology
  • Design FMEA – Examples & Case Studies
  • Process FMEA – Examples & Case Studies.
  • Group Exercises ( Participants will be divided into groups and each group will prepare and study an example of FMEA)
  • Developments & Benefits of FMEA
  • Using FMEA for Risk assessment
  • Machinery FMEA

Key Take Aways



After undergoing the programme, the participants will be able to -

  • Concept of FMEA as a risk management and preventive quality assurance technique
  • How to carry out Design FMEA and Process FMEA in industries
  • Practical implementation of FMEA through Group Excercises & hints
  • Concepts of Machinery FMEA

Training Methodology



There will be a combination of lecture sessions with case study presentations and specific simulation examples. The participants will get an intensive exposure on FMEA with active involvement in problem solving, through group exercises. The workshop will be highly interactive where participants can raise questions and solicit feedback from the faculty.

Participation Fee



Rs. 8500/-

IMTMA Members / Micro Companies

Rs. 9500/-

IMTMA Non Members/ Others

+18% GST

Group Concession : 5% for 3 to 5 and 10% for 6 and more delegates being nominated from the same company

Special concession available for Faculty & Students from engineering colleges

(subject to availability of seats)



Participant Profile

This programme will benefit practicing engineers and senior technical personnel involved in the functions of Design and Development, Process Planning, Product Engineering, Application engineering, Quality Assurance, R&D, Manufacturing, Servicing etc., and other related areas from Machine Tool, Automobile & auto ancillaries, Tool rooms, Defense and Railway establishments, General Engineering and other Capital goods manufacturing industries.

In order that the participation is effective and beneficial, it is recommended that participating companies depute a multi-disciplinary team of 2 or 3 people from the above functions. Participants should have knowledge of related products and processes.


Faculty

This programme will be addressed by Mr. M. C. Ramakrishnan, former Vice President - Quality, Bosch Limited.

Mr. M. C. Ramakrishnan is an industry expert with over 37 years of experience in the field of quality tools like Six Sigma, SPC, MSA, Poka - Yoke etc. He is a trained Six Sigma black belt and championed number of projects at Bosch Limited.


Participants Feedback

The workshop on FMEA was very useful. This is first time attended this kind of programme. It was good & effective. We learned so many thing about FMEA
- Mr. Venkatesha. N, Disa India

Very Good Course, very useful for work, very informative - Mr. Onan J Pinto, Micropack Ltd.

Plant visit was very usefull. Keep it up - Mr. Venkatanarayanan V, LM Wind Power


Industries Participated

The previous programmes have been well received by delegates from DISA India Limited, LM Wind Power Technologies (India) Pvt. Ltd., Manipal Technologies Ltd., Micromatic Grinding Technologies Ltd., Sansera Engineering Pvt. Ltd., Titan Industries Limited, Walvoil Fluid Power India Pvt. Ltd., etc.


For Registration Contact

Himachal Bhowmik

Programme Co-ordinator

Telephone :   080 66246902
Mobile :   9740092629
Email :   himachal@imtma.in

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.

Important Information : Participation fee includes, course material, working lunch and tea / coffee. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

Suggested Programmes


Finishing of Edges-Burr Management

19 to 20 July, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Troubleshooting of Casting Defects

23 to 24 July, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Gear Metrology and Measuring Methods

2 to 3 August, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Surface Finish- Measurement & Improvement

9 August, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Fundamentals of Heat Treatment Processes

23 to 24 August, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Get in touch

Copyright © 2018 IMTMA. All Rights Reserved.