IMTMA Training Centre

'Hands on training in programming & Operation of CNC Machining Centres-Basic'

Date : 15 to 19 July, 2019

@ 12/5, D1 Block, MIDC Chinchwad, Pune

Introduction

CNC machines have become the order of the day in every manufacturing industry.
These applications are wide spread in mass production units, batch production as well as in tool room industries.
Thorough understanding of Programming and Operation of the CNC machines is a must in order to realize the maximum output.
Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organizing a 5 day programme on Programming and Operation of CNC Machining Centres on 15 - 19 July 2019 at Pune.
This programme will address the programming and operation of CNC Machining centres in detail including finer aspects like control of dimensions, surface finish and optimization of machining parameters.
The procedure for safe running of the machine would be dealt along with autonomous maintenance practices. The participants will be trained hands-on in production CNC machines with real time machining exercises

Focus Areas



  • Elements of VMC and different modes in the machine.
  • G codes and M codes applicable to VMC
  • Structure of a VMC Programme for VMC
  • Work and tool set up; Measuring tool offsets in X ,Y and Z axes.
  • Programming using canned cycles
  • ISO system of tool designation.
  • Dimensional control in VMC , Correction of wear offset for achieving tolerances.
  • Selection of tools and machining parameters.
  • CAM programming – Usage and advantages.
  • Autonomous maintenance principles – Procedure and Check points.

Hands-on training on the machine for :

  • Understanding modes and screen navigation.
  • Work and tools set up in the machine.
  • Measuring work and tool offsets.
  • MDI commands and JOG movements.
  • Programme entry and simulation.
  • Machining exercises involving different cycles.
  • Measuring dimensions on the machine and control.
  • Autonomous maintenance check points.

Key Take Aways



After undergoing the programme, the participants will be able to –

  1. Learn Programming and Operation of VMC.
  2. Do work set up and tools set up in VMC.
  3. Carry out inspection and dimensional control of parts on the machine.
  4. Select tools and optimise machining parameters for improving productivity.

 

Participation Fee



Rs. 10000/-

IMTMA Members / Micro Companies

Rs. 11000/-

IMTMA Non Members/ Others

+18% GST

Group Concession : 5% for 3 to 5 and 10% for 6 and more delegates being nominated from the same company

Special concession available for Faculty & Students from engineering colleges

(subject to availability of seats)



Participant Profile

This programme will benefit Machine shop engineers, technicians as well as fresh engineers aspiring to learn VMC programming and operation.
A Basic knowledge on machining operations is essential


Faculty

This programme will be conducted by industry experts from IMTMA Technology Centre.


For Registration Contact

Santosh Singh

Programme Coordinator

Telephone :   8149045462
Mobile :   9021442692
Email :   santosh@imtma.in

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.

Important Information : Participation fee includes, course material, working lunch and tea / coffee. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

Suggested Programmes


Cost & Cycle Time Reduction in CNC Machining

25 to 26 July, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Selection & Application of Tooling for CNC Machining Centre

30 to 31 July, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Finishing School in Production Engineering

12 August to 10 September, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Machining Aerospace Materials-Chalenges and Solutions

23 to 24 August, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Finishing School in Production Engineering

4 September to 4 October, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Get in touch

Copyright © 2018 IMTMA. All Rights Reserved.