IMTMA Training Centre

Improving Process Capability

Date : 27 to 28 August, 2019

@ 12/5, D1 Block, MIDC Chinchwad, Pune

Last date for registration 12 August 2019

Early Bird Offer : Avail 10% concession by registering and paying online on or before 12 August 2019

Introduction

 

Control Charts and SPC techniques are used by Quality / Process engineers in the Industry for many years, for process control and calculating process capability. Yet there are few myths which need to be discussed and clarified in every practicing engineer's mind. Often this topic is taught / learnt from the standpoint of a statistician or just as a metric. Engineers fail to understand the reasons and the impact of the process variation on the product in a real life scenario; Particularly because data collection & calculation of performance has been simplified and automated today like never before, many engineers have missed on development of an insight and ability to interpret the numerous data around. Software is used but the assumptions not understood. All this results in not getting any real benefits.
Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organizing a 2 day programme on Improving Process Capability 27- 28 August 2019 at Pune. This programme is meant for practicing engineers who are already aware and are using control charts and calculating Cp/Cpk and who would like to derive the real benefits from these techniques.

 

Focus Areas



Understanding relevance of Process capability ,PPM
Interpreting process capability results
Various scenarios of Cp ,Cpk, Pp, Ppk
Calculating process capability in short runs
Using Pre Control charts
Process capability of GD & T tolerances
How to use results to improve processes and capability
Interactive discussion for Questions from Participants
The programme will be interlaced with interesting real life examples which the participants from various industries will be able to identify with.

Key Take Aways



After undergoing the programme, the participants will be able to -
1.Interpret calculation results correctly
2.Control the process better
3.Improve the process
4.Reduce cost of quality
5.Calculate process capability in situations such as unilateral tolerances, short run process capability, and for GD&T tolerances

Participation Fee



Rs. 7500/-

IMTMA Members / Micro Companies

Rs. 8500/-

IMTMA Non Members/ Others

+18% GST

Group Concession : 5% for 3 to 5 and 10% for 6 and more delegates being nominated from the same company

Early Bird Offer : Avail 10% concession by registering and paying online on or before 12 August 2019

Special concession available for Faculty & Students from engineering colleges

(subject to availability of seats)



Participant Profile

This programme will be an advanced level one and will benefit those who are part of Quality Assurance , Production and Process Improvement CFT's. including those from Marketing, PurchaseDept., Production, PPC, etc. Particularly useful for organizations with Quality System certification and those seeking consolidation in building a robust system inclusive of all – Product , service and commercial disciplines.
Pre requisites: All participants must be able to plot a histogram, calculate standard deviation, plot control charts, calculate Cp/ cpk as this will not be covered in detail in this programme


Faculty

This programme will be conducted by Mr. Gautam Doshi, Advisor, IMTMA ,Industry experts and Mr.Avinash Khare,Indusry Consultant,Head-Pune Tech Centre.


For Registration Contact

Santosh Singh

Programme Coordinator

Telephone :   8149045462/63
Mobile :   9021442692
Email :   santosh@imtma.in

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.

Important Information : Participation fee includes, course material, working lunch and tea / coffee. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

Suggested Programmes


Finishing of Edges-Burr Management

19 to 20 July, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Troubleshooting of Casting Defects

23 to 24 July, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Understanding and implementing of risk assessment through FMEA

25 to 26 July, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Gear Metrology and Measuring Methods

2 to 3 August, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Surface Finish- Measurement & Improvement

9 August, 2019, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Get in touch

Copyright © 2018 IMTMA. All Rights Reserved.