IMTMA Training Centre

Burr Management in Machining

Date : 12 to 13 December, 2019

@ Motherson Techno Tools Limited, A-2, Sector-84, Noida - 201301

Introduction

As long as there has been metal cutting, there have been burrs—an unwanted side effect of the process. Barring a revolutionary change, burr formation will always be a problem. With a few exceptions, conventional machining techniques always produce burrs. Burr prevention requires both conventional and nonconventional approaches. However, even when burrs are not produced, sharp edges left at the end of the machining process generally are not acceptable and require edge treatment. Burr removal represent unnecessary cost to the industry in various forms such as additional manufacturing, compensation, service, recall, and spoiling of the company image. Therefore, in most cases, it is a must either to remove or to secure the burr in order to prevent it from being detached from the part.

Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organising a two day programme on Burr management in Machining on 12-13 December 2019 at Motherson Techno Tools Limited, Noida. This program will give a clear knowledge to participants on Burr definition, burr geometry, Burr formation mechanisms, Burr types and standards for burrs & edges. Various methods on burr less operations, Burr prevention and Burr minimization technique will be discussed.

Focus Areas



  • Definition for Burr
  • Deburring process enhancement
  • Burr geometry
  • Burr formation
  • Cross hole deburring
  • Availability of standards for burr & edges
  • Automation of deburring using robots
  • Burr prevention
  • Non traditional deburring processes with case studies - Thermal Energy Machining & Electro Chemical Machining
  • Burr minimization
  • Design for edge quality
  • Eliminating waste
  • Use of better cutting tools
  • Practical demonstration on burr generation, prevention and minimization on CNC operations.
  • Financial impact on getting rid of burrs
  • Live Demo of innovative deburring tools in CNC VMC.

Key Take Aways



       After undergoing the programme, the participants will be able to -
1. Define the burr and edge quality in the process and able to understand how it affects fit, function and safe use of product.
2. Plan & implement burr-less operations or minimise burr in manufacturing.
3. Gain knowledge on various conventional and non conventional methods for burr prevention and burr removal.
4. Get awareness on various equipments and processes practiced in manufacturing industry and their availability in the market.
5. Cost benefits and manpower reduction due to burr prevention activities.

Participation Fee



Rs. 8500/-

IMTMA Members / Micro Companies

Rs. 9500/-

IMTMA Non Members/ Others

+18% GST

Group Concession : 5% for 3 to 5 and 10% for 6 and more delegates being nominated from the same company

Special concession available for Faculty & Students from engineering colleges

(subject to availability of seats)



Participant Profile

This programme will benefit Senior / Middle management members and Engineers from functions of R&D, Product Design, Process Planning, Production, Quality Assurance from Automobile & auto ancillaries, Machine Tools, Consumer Durables, Aerospace, Defence & Railway establishments, General Engineering industries. Continuous improvement leaders, TPM & Six sigma project leaders can derive benefits out of the programme.
The programme will be highly interactive where participants can solicit feedback on specific technical issues from the
expert faculty.


Faculty

This programme will be conducted by Mr. Krishna Raghavendra Bhat and other Industry experts from Motherson Techno Tools.
Mr. Bhat is former Vice President - Manufacturing at L. G. Balakrishnan & Bros. Limited, Coimbatore with over 41 years of experience in Manufacturing Engineering and plant operations. He has been successful in implementing various productivity techniques, bringing Process perfections and operational excellence. He has also planned & established manufacturing engineering & localization projects for fuel injection component manufacture; implemented VA/ VE projects, mfg. process optimization & methods improvement activities. An MBA and Mechanical Engineer, Mr. Bhat has been associated with Triton Valves, Delphi TVS, Stanadyne Amalgamations and Bosch.


Participants Feedback

"Good initiative from IMTMA about burr management. This technology is quite important at current industrial situation. Please continue & reach more engineers". - Mr. M.Sambath, TVS Motor Company Limited.

"Excellent program & got wide information on Deburring". - Mr. Selvakumar K, Shanti Gears Limited.


Industries Participated

The previous programmes have been well received by delegates from Carraro Technologies, Eastern Engineering
Company, ELGI Equipments, Forbes & Co., Greaves Cotton, TVS Motor Company Ltd., Kirloskar Pneumatic, Liners, Liquid Propulsion, Mach Aero Components, Rollon Hydraulics, Shanti Gears Ltd., Pragati Automation, Sandvik Asia, Toyota Kirloskar Auto Parts, Trelleborg Sealing Solutions, etc.


For Registration Contact

Amarendu Debnath

Executive

Telephone :   +91-124-4014101
Mobile :   +91 9977133067
Email :   gurgaontraining-an@imtma.in

REGISTRATION : Prior registration for participation is necessary. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.

Important Information : Participation fee includes, course material, working lunch and tea / coffee. Interested companies are requested to register online by clicking on 'REGISTER' button and by filling up the nomination authority and participant's details in specified form.

Suggested Programmes


"Hands-on training in Operation of Co-ordinate Measuring Machines (CMMs)"

9 to 13 December, 2019, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Defects Analysis of Paint & Powder Coating Applications

9 to 10 December, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Gear Metrology and Measuring Methods

13 to 14 December, 2019, 12/5, D1 Block, MIDC Chinchwad, Pune

Trouble shooting of Casting defects

10 to 11 January, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Value Stream Mapping (VSM) and Value Stream Design (VSD)

20 to 21 January, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Get in touch

Copyright © 2018 IMTMA. All Rights Reserved.